How to Get Your Wii to Work Again
Technology has brought us much joy and convenience, and Nintendo Wii consoles are ane of those joys.
Nonetheless, none of the smart gadgets that we honey are perfect, and nosotros tend to run into glitches equally we utilise them.
Fortunately, there'southward well-nigh e'er a way to fix the outcome.
Even if your Wii is turning on by itself, yous don't accept to worry.
The solution is relatively uncomplicated.
Read on to figure out how you tin solve this outcome and other common ones that may occur with Nintendo Wii.
Wii Turns on By Itself (Causes, Fixes)
This problem could happen for 3 reasons, so it'due south best to rule them out i at a time.
Note that, if you lot notwithstanding can't solve the problem afterwards going through the list, yous tin ever unplug the Wii when you're non using it.
i. Wiiconnect24
If y'all find a blue or orange light, it doesn't hateful that the device has turned on.
There'south a feature called WiiConnect24 built into Wii consoles that lets them remain continued to wireless internet and Nintendo even when y'all plough them off.
That lets the Wii constantly search for new firmware and software updates and also get your messages.
If you see a stark blue or orange LED light coming from the disc slot, it means that either your friends or Nintendo have sent you a message.
It could exist an invitation or a new update set up for download.
You tin can plough this characteristic off if information technology's bothering y'all:
1. Go to the Wii Menu.
2. When you hover the cursor over the big button sitting on the bottom left corner of the screen, it'll read Wii Options.
Click on it.
iii. Click on the large foursquare button that says Wii Settings.
iv. When yous get to the Wii System Settings 1, click on the small arrow on the right side of the screen.
5. Under Wii Organisation Settings 2, click on Wiiconnect24.
half dozen. Click on the Wiiconnect24 push button in the new window as well.
7. Now select Off, and so click on Confirm.
ii. Remote
If your Nintendo Wii turns on completely and the light is green, the first thing you should check is the remote.
Sometimes when you leave the remote around the house, something could printing the power button and plow on your Wii.
If yous have pets or babies, they could be pressing the button.
Make sure the remote is in a rubber place with its button facing up.
If the Wii turns on once again, it's possible that one of your neighbors also has a Nintendo Wii.
One time they turn on their device with their remote, information technology could exist turning yours on as well.
Strangely enough, this has happened to lots of people.
3. Fan Problems
Some users have reported that the problem is caused by a faulty fan.
Feel the side of the Wii and run across if it gets actually hot afterwards working for a while.
If so, the fan could be damaged.
You should call Nintendo and have them check your fan.
Other Wii Issues And How to Solve Them
1. Wii Turns off by Itself
A. Overheating
Feel the console.
If it's really hot, you lot probably have a fan problem on your hands.
When the device overheats, it automatically turns off to forestall damage to its primary components.
One time the device has cooled down, turn it back on and listen to the fan.
If you don't hear it, it's not working, and you will demand to become it fixed.
If the fan is working, merely the Wii is still overheating, you should become rid of any built-up dust.
You can use a vacuum cleaner or take a technician do a thorough cleaning.
In one case you eliminate the dust, make sure you don't put the console in an enclosed area without ventilation once more.
B. Air conditioning Adapter Problems
Resetting the Ac adapter might exist just what you lot need to solve the result.
Unplug both ends of the Air conditioning adapter from the panel and outlet.
Await a couple of minutes before plugging them back in.
C. Accessories
If the Wii console shuts down unexpectedly while you take an accessory plugged in, the fault is probably with that accessory.
Unplug it and and then reset the AC adapter as explained above.
ii. Wii Doesn't Turn on
The console may turn on and testify the warning screen only fail to display the "press A to continue" message.
In this case, you'll just have to remove the GC memory cards and effort again.
If the Wii doesn't boot at all, the first thing you should cheque is the Ac adapter, which is some other problem with the ability.
Follow the steps explained in the previous section, and if you couldn't solve the issue, endeavor the following:
A. Outlet Problems
Maybe the outlet has a problem.
If a wall switch controls the outlet, ensure that it's on.
Then either effort plugging in another device like a lamp into the outlet to make sure information technology works or plug the panel into another outlet to see if it works.
B. Damaged Ability Supply
If the ability supply has become disconnected or damaged because of old age, the console won't plough on.
You could try moving the cables around to meet if it starts working, but it'due south best to supervene upon it.
First, try plugging in some other ability supply to make sure the Wii turns on.
C. Faulty Bluetooth Board
The Bluetooth or Wi-Fi boards could have been damaged or asunder from the motherboard causing the console to close off.
You accept to reset or replace them to get the Wii to start.
D. Faulty Motherboard
If none of the mentioned solutions worked, the problem is with your motherboard, and you'll accept to replace information technology.
3. No Video or Sound
If you have no sound when using the Wii, showtime cheque the mute button on the remote.
If it wasn't on mute, or if you're getting no moving picture, make sure the TV is on the right video aqueduct output.
Lastly, cheque the video and audio cables to brand sure they're plugged all the way into the panel and Tv ports.
Sometimes the cables aren't in the respective ports with the right colors.
4. Wii Won't Take or Read Discs
If you can turn on the Wii, but the DVD drive won't spin or accept discs, one of the following has to exist the issue.
A. Damaged Cable Connexion
A ZIF data cable and a 12-pin power connector connect the DVD bulldoze to the motherboard.
If one of them becomes asunder or damaged, the Wii won't take discs.
You'll first accept to remove the DVD drive and ensure both cables are connected.
If then, check the connections to the motherboard.
B. Faulty DVD Drive Lath
If the drive is continued correctly, and then the board on the DVD drive might have a problem and will need to be replaced.
Y'all can either replace the board, which is a tricky business, or the whole DVD drive.
The Nintendo Wii "Strip downwardly" for Disc-Drive Replacement video volition show you exactly how to do it.
Also, you can e'er accept Nintendo or some other professional person set up it for you lot.
C. Faulty Motherboard
It'south difficult to make up one's mind if the motherboard is the issue or not, so the best way to go is to rule out all the other causes.
If you're unsure whether the DVD drive is in working order, test information technology on some other Wii console.
If the bulldoze is fine, you'll accept to replace the motherboard.
If the DVD drive accepts your disc, but yous get the "Unable to Read Disc" bulletin or a like error, hither are the possible causes.
5. Disc Problems
Make sure you've inserted the disc correctly in the console.
If so, your all-time bet is that the disc is merely dirty, causing the drive to fail reading it.
Eject the disc and clean it with some cotton and h2o.
If you lot however get the error, try inserting some other disc.
If the Wii can read it without trouble, the first disc is badly scratched and damaged.
You'll have to supercede the disc.
If you keep getting the error for different discs, there'due south a trouble with the console.
A. Overheating
Touch the side of the Wii console and see if it'southward overly hot.
Overheating can crusade disc read errors.
Turn off the Wii entirely and wait for it to absurd downwards earlier inserting the disc again.
B. Muddy Laser Lens
The laser lens is the modest office of the disc drive responsible for reading the discs.
If it gets muddy, you'll become the mentioned error.
Nintendo used to provide lens cleaner kits for the market, just unfortunately, they've been discontinued for years.
Therefore, you'll have to go creative and make a tool that helps you clean the lens.
The Wii Lens Cleaning *Disc Read Error Fix* will help you through the process with simple tools.
C. Damaged Laser
Unfortunately, cleaning the lens rarely solves this error, and consummate lens failure is pretty common in Wii consoles, peculiarly if yous've been using them for a long time.
You lot'll have to replace the lens to ready the problem.
If you lot still accept a warranty, contact Nintendo, and they'll do it for gratis.
If not, you tin can either bring the device to a repair shop or modify it yourself with some help from the Nintendo Wii Lens Replacement video.
6. Wii Makes a Lot of Noise
If the Nintendo Wii is suddenly making a lot of noise, there'south a trouble with the hardware, more specifically, the drive or the fan.
If the console makes noise simply when a disc is inside, the drive is damaged, and you'll have to prepare or supersede it.
If the console also overheats, in addition to making loud noises, the fan is faulty.
You could endeavour cleaning the fan, just as information technology gets old, information technology'll eventually neglect.
7. Wii Gets Hot While on Standby
This is yet another downside to the Wiiconnect24 feature.
While the Wii is in Standby mode, the Wiiconnect24 keeps most of the hard drive working.
However, the fan isn't cooling down the console, then overheating is expectable.
You tin either go to settings and disable the Wiiconnect24 while in standby way or plow it off completely.
8. Remote Problems
A. Wii Remote Doesn't Sync or Work
If the Wii remote has lost sync, you should first articulate all synced remotes, reset the Wii remote, and then resync the remote.
Complete the following steps:
one. To clear all syncs, yous'll have to turn on the console and wait for the Wellness & Safety screen to announced.
2. Without pressing the A button, find the small flap in the Wii console'south front part and open up it.
Information technology's the same compartment where you insert SD cards.
3. You lot should encounter a red button reading SYNC.
Press the button and hold for 15 seconds, then the system clears all the syncs.
4. Now, y'all'll have to reset the remotes or just the troubling ones.
Have out its batteries, look a couple of minutes, and reinsert them.
5. Wait a few seconds before proceeding to printing whatsoever of the buttons.
Now, open up the SD card slot again and remove the battery cover of the Wii remote.
half dozen. Presently press the cerise SYNC button on the Wii remote until the LED low-cal on the front of the remote starts blinking.
7. Speedily press the red SYNC button on the console and release information technology.
8. When the LED stops blinking and illuminates a steady light, it's synced with the Wii console.
Echo steps 5 through viii to sync other remotes as well.
Note: If the remote doesn't start blinking at all, then the bombardment is dead, and you'll accept to supercede them with fresh ones.
B. The Cursor or Grapheme Movements Aren't Responding
If the cursor ofttimes disappears, is off-eye, upside downwardly, or erratic, you should first confirm the sensor bar's placement and connection.
If the installation seems fine, the sensor bar'south cord might have been damaged, and you'll have to replace information technology.
To verify the sensor bar is in working status, you'll take to use your phone camera or digital camera to come across the infrared lights coming out of it.
Notation: These lights are invisible to the naked heart, and yous should too make sure the camera yous're using doesn't have infrared filtering.
Use your front-facing phone camera if you're not sure.
After connecting the sensor bar to the console, turn the Wii on.
And so point the camera at the sensor bar.
If y'all see five small lights on each side of the sensor bar, and so it'due south working.
There should be no sources of vivid light near the Idiot box for the remote to work at its all-time.
For example, there shouldn't be whatsoever windows behind the Tv reflecting low-cal towards the remote.
Also, remove any sources of infrared calorie-free from the room because they can disrupt the connection.
These include whatsoever kind of flame or heat source.
Ensure you're using the remote direct in front of the sensor bar and within 3 to ten feet of it.
You may also take to clean the pointer lens on the remote if it'southward gotten muddy.
9. Games Freezing
Game freezes happen every once in a while.
You can solve them past going through the steps for resetting the Air conditioning adapter.
If freezing often occurs with one game, then the game disc is probably cleaved.
If it happens with all games, check the sensor bar connectivity as explained in the previous section.
Also, older versions of modchips unremarkably create lags and freezes in games, so you have to update them.
If the problem continues, in that location'due south something wrong with the Wii panel, and you'll have to have it checked out.
10. Mistake Codes
A. Hardware Problems
If you get one of the following error codes, at that place'due south a problem with Wii's hardware:
- 110210
- 110211
- 110212
- 110213
You might specifically get these errors and having hardware issues afterwards updating the Wii console.
If you can't determine the issue by going through the listing of problems this article has mentioned, and then it'south best to bring your console to a repair store.
B. Router Issues
If y'all get 52030 or 32002 errors while navigating the Wii, there are some router issues.
Perform the following changes in guild until ane works:
1. Modify the router's channel from i to eleven.
two. Change the panel's security settings from WEP to WPA.
3. Disable the Nintendo Wii'southward security temporarily and restart the panel.
Source: https://www.thetechwire.com/wii-turns-on-by-itself/